Sentence examples for provides sufficient strength from inspiring English sources
This conversion, however, represents only a rough estimation, and accurate calculation of the surface thickness that provides sufficient strength to the model requires further mechanical validation.
Press-fit fixation of a bone block on the femoral side provides sufficient strength of approximately 400 N when underdrilled by 1 mm and further dilated [ 11, 13].
In addition, the ACI presents guidelines for related tests to evaluate whether the structural members provide sufficient strength, stiffness, ductility, and energy dissipation capacity via performance testing.
The frame designed to act as the reaction beam for pile load tests, and provide sufficient strength against applied load with minimal deflection (Fig. 2).
WBS was found to provide sufficient strength at the bar embedded length of 8, 8 and 11 times the bar diameter under tensile, shear and flexural loads, respectively.
An opening size of 125 µm or smaller provided sufficient strength to a commercial porous support layer when operating at transmembrane pressures at or below 2750 kPa.
The treatment should provide sufficient strength and generate minimal material enforcement without producing sharp edges; it should not provoke any endogenous changes or potential damage in the long term (like dislocations at fibres), just to name a few examples [3].
We developed a new, biodegradable patch (modified gelfoam, MGF) consisting of a spongy inner core (gelfoam) to encourage cell engraftment and an outer coating (poly ε-caprolactone) to provide sufficient strength to permit ventricular repair.
Results show that woven mesh polyester backings provide sufficient strength to the overall structure for PRO; however, the porous support layer undergoes deformations that depend on the opening size of the backing.
Conventional lateral resisting systems can provide sufficient strength and ductility for design based earthquakes, although the considerable residual deformation remaining in the plasticized regions undermines the resiliency of the structures.
In Japan, form blocks are widely used in new construction projects where only grouted concrete used to fill the hollow zones inside the blocks would be considered to provide sufficient strength, and blocks would be considered to function only as a form (Architecture Institute of Japan 2006).
