Sentence examples for protocol relative from inspiring English sources

Future studies examining this protocol relative to an active control are needed.

EPM and DDPA achieve equal relative savings, whereas for CEN EN16258 2011 and the GHG protocol, relative savings vary, on average.

Low and high test times were 1.4 and 1.5 hours, respectively, for the 2-tiered protocol and 2.0 and 2.0 hours, respectively, for the 1-tiered protocol (relative ratios, 1.47 for low test times in each protocol and 1.32 for high test times in each protocol).

Low and high direct costs were $3.46 and $7.88, respectively, for the 2-tiered protocol and $5.64 and $10.88, respectively, for the 1-tiered protocol (relative ratios, 1.63 for low direct costs in each protocol and 1.38 for high direct costs in each protocol).

In this part, we will prove the robustness of the proposed security protocol relative to the exchanged messages and the global security architecture and validity of the key.

As illustrated in Figure 2, there was an upregulation of definitive endoderm markers: Sox17 (13 fold) and Foxa 2 (6 fold) in the latter steps of the protocol relative to their respective expression in embryonic stem cells (Step 1).

Furthermore, Figure 11 illustrates that the RPGM movement pattern doubles the goodput of both routing protocols relative to RWP.

The student would then proceed to a second station for Direct Observation of Procedural Skills (DOPS) and would be required to perform two ultrasound scanning protocols relative to the patient's chief complaint.

Under the adequate protocol, the relative error in prediction of analytes is within the tolerances found in the pharmacopeia (10%).

Our experiments were made using a specific 2P-STM/STS approach allowed by an atomically precise STM probe positioning protocol with relative probe-to-probe separation distances down to 30 nm.

On the other hand, when the curing is performed after a long staying time at room temperature followed by a post curing protocol at relative high temperature, i.e.80 and 125 °C, high crosslink density is achieved with even 2.5 phr of IL, which corresponds to a IL/epoxy molar ratio of 0.007.