Sentence examples for proper viscosity from inspiring English sources

Special attention is dedicated to the definition of a proper viscosity when the non-Newtonian fluid is involved.

For example, it was indicated that turbulent friction factors for non-Newtonian fluids can be obtained from the curves used for Newtonian fluids after the proper viscosity is inserted into the generalized Reynolds number (Govier 2008).

The curve between half-life period and oil viscosity had an inflection point and its corresponding oil viscosity can be used as proper viscosity suitable for heavy oil solution gas drive and sand-carrying cold production.

A mixture containing 80wtt % active materials (3 mg), 10 wt % acetylene black, and 10 wt % poly-tetrafluoroethylene (PTFE) was well mixed in N,N-dimethylformamide DMF) uN,N-dimethylformamide DMF with the proper viscosity, and then the sluntilwas uniformly laid on a piece of Ni foam aboutheycm2 that was used as a current collector and then dried at 80 °C formedh.

Despite the progress in vitreoretinal surgery and the importance of silicone oil as an adjunct for the treatment of complex forms of retinal detachment, controversy still surrounds the issue of selecting the proper oil viscosity for clinical use[ 1, 2].

Despite the progress in vitreoretinal surgery and the importance of silicone oil as an adjunct for the treatment of complex forms of retinal detachment, controversy still surrounds the issue of selecting the proper oil viscosity for clinical use.

Thereafter, a proper amount of viscosity modify agent (VMA) was used to improve the structural integrity by increasing the contact behaviour between the adjacent extruded layers.

Thereafter, a proper amount of viscosity modify agent (VMA) and different curing method were applied to improve the structural capacity by increasing the bonding force between the adjacent extruded layers.

The measurement of the interfacial tension by the breaking thread method is known to be a proper method for high viscosity materials such as polymer melt.

The millbase viscosity was controlled for proper pigment grinding and also to prevent breaking the container.

However, because of problems in polymer injectivity due to the high viscosity of polymeric solution, proper injection criteria are hard to be continued.