Sentence examples for processed areas from inspiring English sources

In the case of mechanical processing with vibration, the current of the processed areas was decreased, as shown along A-A' in Figure 4b.

The heights of the protuberances formed by electrical processing with vibration at a high voltage were higher than those by mechanical processing with vibration.Current distribution images of these electrically processed areas are shown in Figure 5b.

It was confirmed that electrically processed areas can be deeply removed by subsequent mechanical processing without vibration.

These processed areas were hardly etched by the KOH solution.

With vibration, the mechanically processed areas became protruded.

The friction forces of the processed areas slightly increased as shown in Figure 4c.

Although the electrical resistance is decreased by the mechanical processing without vibration, additional electrical processing on the mechanically processed area further increases the electrical resistance of the surface.

In contrast, with additional mechanical processing, the depth of the electrically processed area became nearly 0.74 nm, thinner than that of the reacted SiO2.

In addition, the increased friction force of the electrically processed area was decreased by the subsequent mechanical processing.

Additional electrical processing caused protuberance at the center of the mechanically processed area; however, the height was as low as <1 nm.

EDX analysis of the processed area indicated that the bismuth component remained after FIB processing.