Sentence examples for procedures of polymer from inspiring English sources

Open image in new window Fig. 4 Procedures of polymer coating on interburden samples: a uncoated Interburden sample and polymer solution; b coated sample immersed in the water coagulation bath; c final sample after polymer solidification.

This contribution aims at improving and completing the proposed computational procedures of predicting polymer based composite material's plastic deformation with the forward Euler algorithm.

Experimental design by the Taguchi method was used for the optimization of synthesis procedure of imprinted polymer.

Gas purging process of cathode side during the shut-down procedure of a polymer electrolyte membrane fuel cell (PEMFC) system is of great importance for a successful cold start.

Based on these relations, a new procedure for determination of polymer viscoelastic properties is described that exploits the frequency dependence of the velocity and attenuation perturbations, and employs multifrequency measurement on the same SAW platform.

Such stabilization is realized by optimizing the dosages of strong polyelectrolyte and non-ionic polymer and by controlling the mixing procedure of the polymers.

In comparison to DGO-OH [21], the relative intensity of the C-C peak remains the same after esterification, but the intensity of the C = O and O-C = O peaks increased, which may be due to increased functionality. Figure 1 Schematic representation of the synthetic procedures of the graphene-polymer nanocomposites.

The products diffuse into the aqueous solution spontaneously due to the doping procedure of the polymers and hydrophilic property of hydrate MnO2.

A common procedure for the preparation of polymer:monomer blends is the dissolution of polymer and monomers in appropriate solvents followed by the mixing of these solutions.

Therefore we developed porous fibre non-wovens with tuneable wettability properties by use of a one step electrospinning procedure and the use of polymer blends with defined molecular weight (MW) ratios.

The concentration of the monomer (acrylic acid), reaction temperature and the reaction time (1 and 3 h) are important factors on the grafting degree – especially because our goal was not to use any initiator during the reaction (there are well known procedures for grafting of polymers by using different type of initiators).