Sentence examples for procedures for fabricating from inspiring English sources

Figure 2a shows schematic diagrams that describe the procedures for fabricating microfluidic devices with multilayered design as we previously reported [14]: The negative photoresist (SU-8 2025, Microchem Corp).

Figure 1 shows a schematic illustration of the process procedures for fabricating Si nanostructures on a single-side-polished Si substrate (p-type (100), 1 to 30 Ω cm, approximately 25 × 25 mm2) by MaCE with spin-coated Ag mesh patterns [6].

A schematic of the Cu chemical displacement technique (CDT) procedure for fabricating Cu/SiO2-stacked ReRAM is illustrated in Figure 1.

In this study, we describe an optimised procedure for fabricating carbon fiber electrodes using Taguchi quality engineering method (TQEM).

Electrospinning is an effective procedure for fabricating submicron to nanoscale fibers from synthetic polymer as well as natural proteins.

The aim of this investigation was to develop and test the accuracy of a procedure for fabricating individual preformed titanium meshes for orbital fractures.

In this paper we present a procedure for fabricating biomimetic water strider legs covered with setae using Polycarbonate Track-Etched (PCTE) membranes as templates.

The objective of this work is to develop and evaluate a powder roll-compaction procedure for fabricating cemented carbides that enables control over its surface/sub-surface grain orientation texture and grain size.

The overall procedure for fabricating multilayer Ti0.91O2/CdS composite nanostructures is demonstrated as follows: the poly methly methacrylate) (PMMA) solid spheres were completely diluted by the protonic polyethylenimine (PEI) aqueous solution, in order to ensure the saturated adsorption of PEI on PMMA solid spheres surfaces.

Fabrication technologies for the HCCR TBM were developed using ARAA to provide the method and procedure for fabricating the TBM for testing in ITER based on RCC-MRx, which was selected as the design and fabrication code and standard for the HCCR TBM.

Nevertheless, the major future challenges for the development of CNT-EC sensors include miniaturization, optimization and simplification of the procedure for fabricating CNT based electrodes with minimal non-specific binding, high sensitivity and rapid response followed by their extensive validation using "real world" samples.