Sentence examples for probing height from inspiring English sources

Bulk micromachined silicon cantilevers behave uniform probing height and a good elastic deformation property, while the electroplated nickel probing tips promise high hardness and satisfactory electric contact performance with the dies-under-test (DUT).

For each probe in each sample run, the relative peak height was calculated by dividing its absolute value by the sum of all probes peak height for this run.

Thresholds at 160 Hz decreased with increasing probe height from 0 to 4 mm at both the hallux and the ball of the foot.

Additional fixed bed experiments make clear that the rate of charge dissipation grows for increasing values of bed height and column diameter, and for decreasing values of probe height.

Localized hydrogen evolution on the specimen surface was probed by an SECM system in which a force sensor was mounted to determine the probe height from the specimen surface.

Thresholds at 20 Hz decreased with increasing probe height from 0 to 1 mm but showed no significant variation between 2, 3, and 4 mm at either the hallux or the ball of the foot.

In a second condition, the force applied to the surround was varied to 1, 2, 3, 4, 5, and 6 N while using a probe height of 1 mm.

3) Reflecting the same correction, a minimum peak amplitude of 5 and 4 and a median probe height of at least 2 and 1.6 were required for UM and M peaks, respectively.

The probe is positioned above the phantom, such that the probe angle α, and probe height h can be controlled.

Varying probe height and angle led to selection of probe setup that enables repeatable measurements, insensitive to small changes in height and angle.

The different deposition areas for several types of cantilever probes on the same chip fabricated by EN plating using different growth rates result in unequal probe heights.