Sentence examples for printed on the surface from inspiring English sources

Micromixers, UV-curable epoxy traces printed on the surface of a reverse osmosis membrane, were tested on a cross-flow system to determine their success at reducing biofouling.

The aircraft-grade aluminum keeps the utensil cool, an asset for manipulating buttery dough, and a ruler printed on the surface lets you measure the width of your crust.

The local strain measurement method using nanometer-scaled micro grids printed on the surface of a specimen by an electron lithography technique (the micro-grid method) has been established.

The experimental test was reproduced numerically by finite element analysis and the recording of deformed grey level images by a CCD camera was simulated trying to take into account the most significant parameters that can play a role during an actual test, e.g. the noise, the failure of the specimen, the size of the grid printed on the surface, etc.

After the photoresist spin and bake, UV exposure, and chemical developing, a 1.5 to 7 μm pillar pattern is printed on the surface of the ZnO/Mo.

Ink solutions containing 4 mg/mL Cytochrome c (Cyt c), 125 mM Zn2+, and 1 M 2-MeIM were loaded in different cartridges (C, M, Y cartridges as shown in procedure ① of Fig. 1) and were directly printed on the surface of hydrophilic film.

One of his pressmen was printing on the surface of paper bags when he accidentally sliced neatly through the paper.

It has been described that only a fraction of antibodies work well after printing on the surface of microarrays, due to the loss of activity by denaturation or degradation during printing and array storage.

The BCZY-LSCF composite (one) layer and LSCF (two) layers were screen printed on the electrolyte surface in the area of 1 cm2.

After the samples were polished up to 1.0-mm thick, Ag paste was screen-printed on the surfaces as electrodes and then fired at 400°C for 10 min. We used X-ray diffraction [XRD] and scanning electron microscopy [SEM] to analyze the crystalline and microstructures.

To fabricate the p-type transistors, bottom-gate electrodes of the p-type transistors were printed on the same surface.