Sentence examples for primary precipitate from inspiring English sources
Effects of nitrogen doping on the glass formation and primary precipitate phase in a ternary Cu Zr Al alloy were investigated.
In association with experimental biofilms, dypingite was the primary precipitate.
This powder, together with the primary precipitate, was regraded as the total BMSS, and the sum of their weights represented about 8%% of the initial cocoon weight.
This initial ("primary") precipitate is assumed to contain sericin fractions that are insoluble due to higher molecular masses and/or structural effects.
The supernatant solution, together with the primary precipitate, were placed in dialysis tubing (MMCO 3.5 kDa) and dialyzed under stirring for 3 days at 50 °C, with six water exchanges.
Lanes 14 17 in the same figure indicated that the primary precipitate contained mainly high molecular mass components, which were degraded to a larger extent than those in the secondary precipitate.
Although the properties of the primary precipitated powders are independent of the chemical or reaction engineering parameters of the precipitation procedure, the structure of treated powders and sintered, dense ceramics strongly depends on thermal and mechanical handling like crystallization or grinding of the alumina ceramic precursor.
Detailed microstructure analysis reveals that the Microstructure of alloys with different Ti/Al ratios are similar after standard heat treatment, and the primary precipitates are γ′, MC, M23C6 and M2B.
The atomic-scale structure and chemistry characterization reveal that primary precipitates with enriched Cu, Ni, Mn and Al originate from continuous growth of B2 ordered domains in the as-quenched alloy.
The model calibration/validation included new experimental data of strain-rate sensitive high temperature flow stress data obtained on an IN100 alloy with a novel microstructure of coarse-grains that include grain boundary primary precipitates of Ni3Al, intragranular coarse secondary γ′ and a high volume fraction of coarse tertiary γ′.
Grain refinement of gravity die-cast Mg-alloys can be achieved via two methods: in situ refinement by primary precipitated metallic or intermetallic phases, and inoculation of the melt via ceramic particles that remain stable in the melt due to their high thermodynamic stability.
