Sentence examples for pressurization for from inspiring English sources

However, the absorbance level upon being subjected to the pressure of 200 MPa for 5 min in the NSS showed some activity, but there was no significant difference when compared to that of the pressure of 100 MPa in the NSS; therefore, pressurization for 10 min would be desirable compared to a time of 5 min.

However, it requires hydrogen pressurization for high temperature operation due to its low hydrogen decomposition temperature.

Median trigger error (i.e. dEMG signal compared to ventilator pressurization) for premature triggering was 0.33 s [0.24 0.46] and for delayed triggering 0.16 s [0.03 0.24].

Each time when the locomotive starts up, the air pressurization for air-braking is necessarily carried out at first, so that there is sufficient compressed air for braking at low speed (≤20 km/h).

For each rho-ZMOF adsorbent, a four-step VSA process with light product pressurization for CO2 capture and concentration (CCC) from dry flue gas containing 15% CO2 in balance N2 is then simulated using a non-isothermal, non-isobaric model.

The NTSB determined that: The probable cause of this accident was incapacitation of the flight crew members as a result of their failure to receive supplemental oxygen following a loss of cabin pressurization, for undetermined reasons.

The pressure time characteristics indicate higher maximum pressure and pressurization rate for Al CuO/CL-20 becAl CuO/CL-20ssure loss at microscale is well compensated becauseaddithen of fine CL-20.

Porcine NC-rich NP tissue was cultured and loaded with hydrostatic pressure (0.5 to 2 MPa at 0.1 Hz for 2 hours) either Daily, for 1 Dose, or Control (no pressurization) groups for up to eight days.

The results quantify the probability from hour to hour during a hurricane and will provide a more accurate estimate of the probability and timing of pressurization of buildings for total loss estimation including rainwater intrusion volumes.

Predictions agree with the breakdown pressure records recovered for experiments for pressurization by CO2 and Ar – higher interfacial tension for subcritical fluids requires higher critical pressures to invade into the matrix, while supercritical fluid with negligible interfacial tension has less resistance to infiltrate into the matrix and to prompt failure.

In this paper, a pressurization method for manufacturing an independent impulsion system is proposed.