Sentence examples for pressure section from inspiring English sources

The base-case simulation model in "Scenario 1: depletion to low pressure" section was used in this study.

Abnormal porosity data or porosities that obviously deviate from the normal trend, probably within the abnormal pressure section, were excluded.

Seismic interval velocities can be used to estimate pore pressure section from surface seismic data but accurate seismic velocities are required for reliable results and offset well data for comparison.

The type H3 hysteresis loop, which does not have adsorption plateau at the high relative pressure section, is an evidence of macropores and cumulate interspaces in the samples [53].

A dramatic increase in the level of nitrogen adsorption quantity was observed in the relative pressure section of > 0.9, and there was no hysteresis between the adsorption and desorption isotherm curves.

This case is then further altered by using a velocity inflow profile instead of a fixed pressure (Section 3.5).

Overpressured formation exhibits several properties when compared with a normally pressured section at the same depth; including higher porosities, lower bulk densities, lower effective stress, higher temperature, lower interval velocities and higher Poisson's ratio.

With the exception of A. nomius, contrasts of mean Ka/Ks values across all cluster genes showed significant differences in selective pressure between section Flavi and non-section Flavi species.

Note from Figs. 4 d) and 5 d) that, for N r < 0, longitudinal radiation pressure cross section profiles do not vary significantly as the real part of the refractive index of the particle is changed, a fact already observed in a previous work [ 17].

The shaft system of the GEN 1 consists of six torsional masses: a high-pressure turbine section (HP), an intermediate-pressure turbine section (IP), two low-pressure turbine section (LPA and LPB), a rotor of generator (GEN) and a rotating exciter (EXC).

Open image in new window Fig. 9 Monitoring data of contact pressure at Section S3 + 762.8. Figure 10 shows the monitoring data of steel arch stress at D of Section S3 + 766.8.