Sentence examples for pressure mold from inspiring English sources

The effect of processing conditions on the development of the normal birefringence in LGP moldings of PCs was ranked from most to least: the packing pressure, mold temperature, melt temperature, injection speed and packing time.

It consists of a high pressure gas supply system, high pressure mold, molding machine, pressure gauge and gas release valve.

The analysis was conducted by changing five significant processing parameters, including coolant temperature, packing time, packing pressure, mold temperature and melt temperature.

Taguchi method was used for optimizing the manufacturing parameters, namely molding pressure, molding temperature and molding time, for friction materials.

Pressure molding differs from the conventional casting methods which are based on slow mold filling (Braszczyński 1989; Perzyk 2000; Górny 2008).

This paper confirms the feasibility of microbe cement binding loose sand particles and presents results from a laboratory research on the influence of molding process (non-pressure molding, pressure molding, discontinuous non-pressure molding and pumping molding) on the mechanical properties of sandstone microbe cement bound.

The water vapor permeability of films obtained by pressure molding from the mixed plasticized samples showed improved barrier properties in comparison with films from wheat gluten plasticized with glycerol.

2D HTC-C/Cs were prepared by hot pressure molding, densification by precursor impregnation and pyrolysis, and then heat treatment at high temperatures, using pitch-based carbon fiber fabric with a high thermal conductivity as reinforcement and mesophase pitch as the binder precursor.

After replacing Tim Lewis, who was fired by Coach Tom Coughlin, Spagnuolo overhauled the defense in the high-pressure mold of the Eagles and their coordinator, Jim Johnson.

Unlike most steel cars, with chassis and body parts stamped into shape in high-pressure molds, most aluminum car parts undergo the more energy- and time-intensive method of casting.

Take similar material into the mold, and form a specimen by cold pressing molding under pressure 25 MPa.