Sentence examples for pressure degrees from inspiring English sources

Then, the technique and test procedures for laboratory pullout testing of grouted soil nails under controlled overburden pressure, degrees of saturation, and grouting pressure are recounted.

All of these mixed finite element methods have an exact 2 1 ratio of velocity degrees of freedom to pressure degrees of freedom.

These pressure degrees of freedom readily resolve the tangential flow along the solid surface inside the gap and are two-way coupled to the pressure degrees of freedom on the grid allowing the fluid to freely flow into and out of the gap region.

The stochastic projection method is considered for the solution of the high-dimensional stochastic Navier Stokes equations since it leads to the uncoupling of the velocity and pressure degrees of freedom.

We address this problem by adding pressure degrees of freedom onto surfaces of rigid bodies, and subsequently using the resulting pressure forces to provide solid fluid coupling in the thin gap region.

Staggered finite volumes are developed on the basis of nonconforming Crouzeix Raviart finite elements, where all components of the velocity lie in the middle of the element edges and the pressure degrees of freedom are found in the centers of mass of the elements.

These factors include overburden pressure, degree of saturation, and grouting pressure in both unsaturated and saturated conditions.

The factors were the following: (1) planetary geomagnetic activity level estimated by Ap-index and divided into five levels; (2) gender – males and females; (3) blood pressure degree – persons in the group examined were divided into hypotensive, normotensive and hypertensive.

Changes in temperature, pressure, degree of hydrolysis of the PVA, and the addition of electrolytes produce a corresponding effect in varying these two types of hydrogen bonding and thus the resulting rheological properties of the PVA solutions.

The performance of the anode-supported SOFC fuelled by ethanol can be improved by either increasing temperature, pressure, degree of pre-reforming of ethanol, and steam to ethanol molar ratio or decreasing the anode thickness and fuel flow rate at inlet.

Equation (2) implies that nodes on a fluid-structure interface have both displacement and pressure degree of freedom.