Sentence examples for pressure charging from inspiring English sources

Li et al. (2010a, b) showed that normal pressure charging occurred during this period.

The storage capacities, storage efficiency as well as the filling time of activated carbon bed are studied for both constant inlet flow and constant inlet pressure charging conditions.

Starting in September 2010 and running for three years the project will utilise the partners expertise and collective skills in engineering, design, combustion modelling, pressure charging and fuels to develop a highly pressure charged downsized engine concept.

From the study it is found that for suitable L/D ratio and external heat transfer coefficient it is possible to achieve a storage capacity of 150 V/V for constant pressure charging condition within 200 s.

Addition of graphite powder for thermal enhancement of system resulted in 22%–27% (for different L/D ratios) rise in storage efficiency for model subjected to constant pressure charging and forced convection whereas 41.8%50.4%% rise in storage efficiency for model subjected to constant inlet flow and forced convection.

Djokovic dives on to the baseline like he's Boris Becker at Wimbledon, before picking himself back up and putting Murray straight back under pressure, before charging into the net kamikaze-style to finish off the point.

MAN two-stroke engines employ constant pressure turbo charging and are scavenged according to the loop scavenging system.

Different from conventional adjusting mechanisms employing the error and change in error of the controlled variable as input parameters, the current chamber pressure and charging or discharging state are chosen as inputs of the compensator, which improves adaptability.

Evolution decreed that the surviving trio of low-speed crosshead engine designers should exploit a common basic configuration: two-stroke engines with constant pressure turbo charging and uniflow scavenging via a single hydraulically operated exhaust valve in the cylinder head.

Simply loosen the schrader valve on the low pressure (suction) charging fitting and listen for escaping refrigerant to determine if the system is still charged.

For scanning electron microscopy (SEM), dry starch powder was lightly sprinkled onto carbon adhesive tabs attached to aluminium stubs and was viewed uncoated in a FEI Quanta 250 SEM (FEI Company, Hillsboro, OR, USA) using variable pressure mode to reduce charging (chamber pressure 60 Pa, accelerating voltage 5 kV).