Sentence examples for press temperature was from inspiring English sources
All the mechanical and physical properties of the boards were improved when the press temperature was increased from 140 to 170 °C.
The results also showed that as the press temperature was increased from 25to6060 °C, significant increased in water absorption and thickness swelling occurred.
By using this screening procedure, three important factors: flake thickness, dried chips moisture content and press temperature were found to have significant effect on particleboard properties.
The optimum press temperatures were found 191 °C, 196 °C and 195 °C, for corresponding press times of 23 min, 24 min and 30 min for 5, 10 and 15 mm board thickness levels, respectively.
Fluid loss and mud cake thickness The filter press (100 psi pressure and room temperature) was used to measure the fluid loss and mud cake thickness of the drilling fluid samples after 30 min.
The temperature was recorded immediately after button press, and was used in the multi-trial average as the subject's threshold.
The temperature was measured by a Nichrome-NiSi thermocouple, which was passed through the press-standing piece in advance of calibrating the sintering temperature.
The temperature was frigid.
The temperature was dropping.
