Sentence examples for preliminary voltage from inspiring English sources

This section presents preliminary voltage control results from both active and reactive power methods presented above.

In addition, preliminary voltage clamp recordings from IPCs suggest that glibenclamide inhibited ~ 30% of total outward current, further suggesting functional KATP channels in IPCs (Mohammad Shahidullah, Yih-Woei Fridell, and Irwin B. Levitan, unpublished results).

For the preliminary post-voltage-change gain calibration, these curves will be extrapolated in time but have abrupt jumps at March 2012.

Furthermore, preliminary testing of voltage measurements using gold-plated acupuncture needles in 0.9% NaCl solution indicated stable readings over a 15 minute period and did not change when the polarity of the electrodes was reversed.

The mass spectrometer was operated in the positive ESI mode, which was found to be more sensitive than negative ESI in preliminary experiments, at a capillary voltage of 2.5 kV, cone voltage of 30 V, a desolvation gas temperature of 350 °C and source temperature of 120 °C.

Within the framework of this preliminary study, the pull-in voltage maximization procedure is developed on the basis of electromechanical microbeams reinforcement topology design problem.

The mass spectrometer was operated in the positive ESI mode (again found to be more sensitive than negative ESI in preliminary experiments) at a capillary voltage of 2.8 kV, cone was at 40 V and source temperature was 80 °C.

In this study, we report the overexpression, purification, and preliminary structural characterization of the voltage-sensor domain (VSD) of human KCNQ1 (Q1-VSD).

A preliminary comparative study on the variation of maximum voltage to ground and voltage across the coils under different impulse voltages indicated that non-standard impulse voltage waveforms develop higher voltage stress in the windings.

Preliminary results indicate that peak-to-peak voltage Up = 34 V is generated at the rotor speed ω = 200 rpm and it increases linearly with ω.

Based on the results in preliminary experiments, we selected anodization time, anodization voltage and NH4F concentration as the key factors to investigate their effects on responses.