Sentence examples for power rails from inspiring English sources

The 1 uF capacitor removes noise in power rails.

We need to use the power rails of the microcontroller unit to provide a stable signal for the ATMEGA1284.

The effects of different scaling scenarios of the local power rails on power noise are also discussed.

Separate 5V and 3.3V power rails were maintained in order to provide the 3.3V VDD for the STA013 and the 5V VDD for the CS4334.

The major commuter railroads -- Metro-North, the Long Island Rail Road and New Jersey Transit -- all began de-icing switches, rails, power rails and overhead catenaries last night.

Wire the outer leads of the switch to the power rails (5V and ground) and wire the pull up and pull down and ADC input to the center conductor of the switch.

A pull-up is a resistor with one end wired to a positive power rail.

The pick is wrapped in a conductive material, which is connected to the power rail.

This is analogous to connecting a dual-supply input to the minus power rail.

A pull-up is required in this case, i.e. a resistor connected to a positive power rail, e.g. 5V.

The voltages on the CLOCK and DATA lines remain at the positive power rail when the keyboard is not sending or receiving data.