Sentence examples for power control command from inspiring English sources

Power control command needs to be more than 1 bit for variable step power control.

In practice, the power control command has to be quantized while obtaining a decent performance.

In this paper, the slow power control may be implemented in each eNB by sending power control command slowly.

In this paper, the acronym CAPC-x refers to conventional power control using x bits in the power control command.

The received signal is expanded to get close to the original version of the power control command.

Very close to the performance of the non-quantized MFxLMS algorithm is achieved with a 4-bit power control command.

Typically, the time interval between power control commands in CDMA systems is around 1 ms [14].

A simple way to compress power control commands is to operate the algorithm in decibel domain [20].

However, during the updating procedure of the IMMSE algorithm, transmission overhead of training sequences and power control commands are incurred.

The only difference to the 1-bit CAPC method is in the quantization, i.e., more bits are used for power control commands in CAPC-2 and CAPC-3.

where (P_{{tx}_{textit {max}}}phantom {dot {i}!}) is the maximum UE transmit power, α is the channel path-loss compensation factor (set to 1 in this work), PL are the propagation losses, M PUSCH is the number of PRBs assigned to the UE, and Δ TF +f Δ TPC ) is a dynamic term that depends on the selected modulation scheme and power-control commands sent by the eNB.