Sentence examples for power conduction from inspiring English sources

The presence of metal objects in the ablation zone, such as Wallstents, is generally considered a contraindication for IRE, because tissue heating due to power conduction may lead to thermal complications.

However, the system's one group of power-conduction joints may induce a single point of failure.

This study compares the thermal management sub-systems of power-conduction joints in planar and MR SSPS.

A previously designed planar SSPS concept collects solar power in two huge arrays and then transmits it through one side of the power-conduction joint to the antenna.

The lower switching voltage is believed due to the low power hopping conduction via oxide defects [7].

Thus, an increase in this ratio increases the thermal conduction power but reduces the power dissipated in the leg resistances.

At the operating frequency of 1 kHz, the switching loss is almost the same as the conduction power loss, making the total power loss of a MMC up to 1.6%%.

The thermal conduction power is dependent on the ratio of area to length, while ohmic heating is dependent on the inverse of that ratio.

The reason is that by increasing the duty cycle the conduction power losses on devices will be increased, too.

While they're wired, the do still require a charge in order to actually power the bone conduction, but should get about 12 hours per — double the time of the Trekz.

These thermal simulations include the phase change (melting and freezing), heat conduction, power generation, and natural convection effects within the liquid.