Sentence examples for potential mode of failure from inspiring English sources

Due to the curved parts, shell-like buckling is a potential mode of failure.

Since the strains experienced within the kink band are very large, the baseline model is extended to account for splitting as a potential mode of failure by adopting a discrete cohesive zone model.

Knowledge of the likely ranges of waste mechanical properties is required to assess potential modes of failure and hence to design the landfill engineering measures.

The stereonets then were analysed according to procedures given in (Hoek and Bray 1981) in order to assess potential modes of failure, thereby allowing potential failure zones to be identified.

The stereonets then were analyzed according to procedures given in (Hoek and Bray 1981) in order to assess potential modes of failure, thereby allowing potential failure zones to be identified.

The need to consider all potential modes of failure, including the unexpected, is emphasised and an outline given of safety factor treatments for crack tip dependent and time dependent modes.

The ratio of differential stress to rock tensile strength (σ 1 − σ 3)/T o then determines the potential mode of brittle failure (Fig. 1).

Trunnionosis at the modular head-neck taper interface in metal-on-polyethylene total hip arthroplasty (MoP THA) has been shown to occur, and represents a potential mode of MoP THA failure.

Fig. 1 Potential modes of brittle failure within intact isotropic rock under horizontal compression (σ v = σ 3), in relation to axes of principal compressive stress (σ 1 > σ 2 > σ 3).

This investigation describes the incidence of material failure, potential modes of device fatigue, and the clinical significance of these failures.

One of the potential modes for the failure of the clip angle connection is the block shear of the beam web material.