Sentence examples for position of contact from inspiring English sources

Also, the proposed formulation is capable of quantifying the influence of misalignments including offset and angular position errors on the contour and position of contact path and lines over a complete mesh cycle.

Figure 13 shows the position of contact points on the wheel tread.

A significant callus had formed around the head and the shaft at their new position of contact.

Any particle (e.g., node point) is then attached (e.g., sticking) to the solid mold, starting from the time (and position) of contact.

To analyze the self-steering ability of the DCW, the curving performances of three types of bogies are compared in terms of wheel/rail lateral force, friction power, and position of contact point on the wheel tread.

In order to compare the steering performance of DCWs with other types of wheelsets, three types of single bogies, i.e., the bogies with the DCW, IRW, and conventional wheelset, are modeled in this paper, and their steering capabilities are compared in terms of wheel/rail lateral force, friction power, position of contact point on the wheel tread, and so on.

Sections  3 and  4 present the quality measures associated with the positions of contact points, and with hand configuration, respectively.

The GO cell compartment investigations not shown in the figure indicate that pathogen abundant orthologs are enriched in crosstalk positions of contact with the host whereas nonpathogen exclusive orthologs code proteins involving in events in the cell interior.

However, when the vehicle passed through a small radius curve, the influence of wheel profiles on the wheel rail normal force, the contact patch size, position of the contact point, adhesion area, and the distribution of the slide area were different for a flexible wheelset and a rigid wheelset.

The design of this system takes into account the following parameters: the effects of excessive strain; specimen depth and width; span-depth ratio; overhang; rate of loading; measuring displacement from the crosshead position; radius of contact points; and the distance between the contacts.

During the machining of microchannels in stainless steel, it is reported that the positions of contacts match with a low number of discharges.