Sentence examples for porosity size from inspiring English sources

Figure 5c shows that the porosity size is in micro-porosity range.

The porosity size distribution was evaluated with Hg-porosimetry using Micromeritics AutoPore IV 9500 system.

We observed a marked influence of microsphere composition on porosity, size distribution and PS-ODN encapsulation efficiency.

In that image, a smooth area was presented; its pores are shown in a range of 0.201 8.30 m which represents the largest porosity size dispersion.

For this to be viable, the porosity, size and shape, strength, and biocompatibility of these synthetic foams must satisfy the design specifications of implants.

The results were associated with the microstructural characteristics of the coatings (porosity, size of lamellae) and with the mechanical properties, such as microhardness and elasticity modulus.

Membranes were characterized for their surface morphology, water contact angle, thickness, porosity, pore size and pore size distribution.

Furthermore, the porosity, macropore size and interconnection pore size were also in accordance with the preferred parameters for bone tissue engineering scaffold.

Mercury intrusion porosimetry (MIP) test method was used to evaluate total porosity, pore size distribution (PSD) and critical pore size.

The scaffolds exhibited highly porous and open-cellular pore structures with almost same surface and interior porosities (pore size, 200 300 μm; porosity, about 90%).

Finally, the corresponding porosity, throat size and particle diameters, etc. are calculated.