Sentence examples for porosity rate from inspiring English sources

The mortar porosity rate distribution dependent on mortar age is displayed in Fig. 5.

After introduction of 100 nm MC interlayer, these defects were suppressed and the calculated porosity rate was significantly decreased.

Effects of mode mixity, initial porosity, rate sensitivity, as well as the initial yield strain on toughness are studied.

Aim of this work is to integrate the already acquired data, providing an interpretation on previous results by numerical simulations: the influence of porosity rate on mechanical properties was investigated by performing both global and local Finite Element Analyses, finding out an explanation on inverse proportionality between material strength properties and porosity rate.

The higher corrosion resistance for plasma arc remelted coating may be due to the more compact microstructure, less porosity rate and tensile residual stress.

The results showed that under the same condition, the porosity rate of the AAC with stone sawing mud and river sand was 73.3% and 74.6% respectively.

In a previous work a set of tensile tests have been performed on different types of specimens, reproducing a set of corresponding emptying strategies, with different resulting porosity rates, and a linear predictive model has been proposed.

Incremental factor ( p_{EX} ) of the capillary pores was acquired by deducing a regression equation for the porosity increase rate according to the mixing rate of the expansive additive by referring to the experimental results of existing studies (Yanimoto et al. 2003; Morioka et al. 1999).

Define the error as the relative porosity increase rate of the calculated model from the experimental data before and after vibration, using one minus the ratio of different porosity increase rate.

Also, the porosity decrease rate along with reaction of C S H and carbon dioxide by calcium carbonate created by the reaction is considered.

Testing was included; water absorption, porosity, sorption rate for physical properties; acid attack resistance, alkaline attack resistance for durability properties; compression and flexural bending for strength properties.