Sentence examples for porosity factor from inspiring English sources

Fig. 5 Correlation between fibre correlated porosity factor (αpf) and galacturonan content of fibres after different treatments.

The matrix correlated porosity factor (αpm) was assumed to be zero since no air bubbles were observed in the cured epoxy matrix by ESEM (Liu et al. 2016a).

In the composites, the porosity (Vp) was assumed to increase linearly versus the fibre volume content (Vf) based on a proportionality constant (porosity factor) αpf (Eq. 1).

The fibre correlated porosity factor increased thereby versus the galacturonan content after retting with P. radiata Cel 26 similar with pectinase treatment (Fig. 5).

The P. purpureum/PLA scaffold had a greater porosity factor (99%) and compression modulus (5.25 MPa) than those of the pure PLA scaffold (1.73 MPa).

In addition, industrial production of untreated hemp fibres cannot be done without damaging the fibres making the field retting the only alternative with much worse properties of 49 GPa and 0.162 for stiffness and porosity factor, respectively.

Effects of the exponent graded and porosity factors are investigated.

The porosity factors (αpf) of composites with differently treated fibres were determined by Eq. (1) based on the experimental data of Vp versus Vf.

The larger the inter-porosity factor, the earlier is the matrix-fracture diffusion start time, and there will be a higher production rate.

This result may give indication about increasing of dissolving then fractures then increasing the permeability, because the porosity is factor in formation factor and the permeability is factor in porosity especially the effective porosity.

The objective of this work was to study the effects of petrophysical rock properties, i.e., amount of fine-grains, porosity, cementation factor, formation resistivity factor,electrolyte concentrations and degree of brine saturation, on the tortuosity factor using Berea and synthetic sandstones cores.