Sentence examples for pore samples from inspiring English sources

For same volume of a single pore, samples with larger pore volume showed smaller thermal conductivity, while for same amount of total porosity, samples with small-sized pores displayed a smaller thermal conductivity.

The mixed microfracture and pore samples are not plotted in Figs. 6 or 7, except for NM2 1354.2 B, which plots as an outlier in Fig. 7, because its mixed microstructure made it difficult to define either the circularity or the microfracture density to the same extent as the single microstructure samples.

The chemical etching was performed in the same conditions as the single-pore samples, i.e., in 0.5 M NaOH at 70 °C.

In our future studies we plan to prepare metal replica of single-pore samples used for resistive-pulse experiments to be able to correlate the resistive-pulse shape and modeled velocity profiles with exactly known pore geometry.

Four set of samples were deposited on p-Si (100) substrates with different initial surface morphology: (i) mirror-polished Si substrates (sample 1), (ii) mirror polished but Fe patterned (sample 2), (iii) mechanically polished having randomly distributed pits of different shape and size (sample 3), and (iv) electrochemically etched Si having uniformly distributed pores (sample 4).

After 7 months of kinetic testing, all but two of the lysimeter ceramic sample cups ceased producing pore water samples because of Fe-rich precipitates.

For the pore-dominated samples, aspect ratio, pore area, circularity, roundness, and vug porosity were determined (Table 2).

Similar to the leachate sample observations, higher Cl− concentrations were observed in pore water samples collected during the initial 7-month leach testing period.

Pore water samples and temperature measurements were taken along transects within each sampling site.

Pore water samples were also obtained from these sediment cores (LL5, LL6, and LL12 samples with the "PW" suffix in Table 1).

Lost Lake pore water samples were separated from the corresponding surface waters, and instead plotted nearest to dam seepage water samples (LL1 and LL10; Figure 2, top).