Sentence examples for pool width from inspiring English sources

The pool width has to be a minimum of 24 feet, with 12 feet on each side of the board.

Errors less than 1.3 μm of the melt pool width for the operating points were found.

The melt pool width and as a consequence the weld seam width determine the strength of the joint.

Using a discrete control filter, the required laser power to meet the reference melt pool width is determined.

Similarly, pool length is influenced by channel gradient, location of the channel constriction, pool width, drainage area and constriction length, with an R2 value of 0.72.

This paper describes two dynamic models relating processing parameters and melt pool width during laser marking/engraving of clay tiles using a high-power diode laser.

East Creek (49°16′ N, 122°34′ W) consists of riffles and pools (width: 0.3 2 m) during dry periods.

Fabricated test coupons were analyzed with two objectives in mind: i) to determine how close each coupon was to fully dense and ii) to determine melt pool dimensions (width and depth) and shape for each coupon.

Thereinto, the relationships between the molten pool depths to width (D/W) ratio and SS are firstly investigated.

The results show that with the increase of ultrasonic power in the range of 60 140 W, the mechanical effect and the acoustic streaming effect of ultrasonic increase the area of molten pool and the width of cladding layer.

The relationships of process parameters, molten pool geometry (both width and depth) and shear strength (SS) in LTW process are systematically investigated through finite element method (FEM), response surface methodology (RS M and experiments.