Sentence examples for polished coating from inspiring English sources

Human-derived osteoclasts were placed on a coating with refined topography and compared to dentine, a polished coating and polished sintered HAp.

A one-way ANOVA test revealed a significantly greater pit depth (P = 0.022) for dentine (14 μm) compared to the as-sprayed and polished coating (5 μm).

The polished coating mainly composed of α-Al2O3 registers a lower wear of 3.00 5.00×10−6 mm3/N m in reciprocating sliding against ceramic counterpart at a speed of 0.33 m/s and a contact pressure of 2 MPa.

The antiwear life of the polished coating reached 2500 m at a speed of 1.25 m/s and load of 300 N and the friction coefficient was more than 0.45 against the steel ring in a Timken tester.

It was found that the oxide scales that formed on the as-sprayed and polished coatings after 1 and 24 h oxidation were different, i.e. while a θ- and α-alumina duplex scale was formed on the polished coating, an oxide scale, containing spinel-type oxides, was formed on the as-sprayed coating.

The microhardness and elastic modulus were measured through micro and nano indentation techniques respectively on the mounted and polished coating cross-sections as a function of distance from substrate coating interface.

However by coating the samples, the improved impedance effect is not simply additive (polished coated sample plus corroded sample).

The corrosion parameters for polished coatings are slightly worse than unpolished, which is related to the method of coating deposition.

The body structure of this section represents a rectangular box of 18-gauge metal sheet with a polished white coating surface.

TBC specimens with pre-oxidized bond coats exhibited longer lifetimes than those without pre-oxidation, especially for metallographically polished bond coats.

Those looked best with a polished wool coat.