Sentence examples for polarisation as a function from inspiring English sources
Such a structure allows to study the change of sign of the GdCo spin polarisation as a function of temperature, and details of the GdCo magnetisation when usual magnetometry is difficult.
The linear polarisation resistance (LPR) method has been compared to the results from Tafel extrapolation, and the alloy compositional dependence of the polarisation resistance as a function of composition is consistent.
The expression of the intrinsic polarisation resistance Rpo as a function of the activity of chloride aCl−o' and the partial pressure of chlorine p̄Cl2 was obtained from the resolution of the kinetic mechanism and it was compared with experimental data.
A schematic diagram of partial polarisation curves as well as the coating composition as a function of the cathode polarisation is presented.
The polarisation behaviour of the two nickel cermet anodes was studied as a function of temperature, hydrogen partial pressure (pH2) and water vapor partial pressure (pH2O).
Potentiodynamic current density potential curves were recorded as a function of the time anodic pre-polarisation, the composition of the solution and the temperature.
The yield of hydrogen evolved during cathodic polarisation of Al Sn alloys in a 2 M NaCl solution was measured volumetrically as a function of current density, temperature and tin content in the alloy.
For this composite, the large increase in the loss tangent as a function of the frequency shows the existence of a strong interfacial polarisation phenomenon, clearly indicating that CNT/PDMS composites are percolative systems with a critical weight fraction between 1.0 and 2.0 wt.% of CNT.
The corrosion behaviour of Ti 6Al 7Nb and Ti 6Al 4V ELI (extra low interstitial) was investigated as a function of immersion hours in simulated body fluid (SBF) condition, utilizing potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) techniques.
The experiments were carried out by irradiating the sample with λ=584 nm, τ=6 ns (FWHM) laser pulses in a buffer borate solution after a cathodic polarisation of −1.5 V/SCE had been applied during 40 min. The removal efficiency has been studied as a function of the number of laser pulses, for several fluence values and for a few time delays after switching off the cathodic polarisation.
Deflection signal as a function of degrees.
