Sentence examples for point components from inspiring English sources

Vapor liquid equilibrium (VLE) of low boiling point components occurs at low-temperature and usually at high pressure.

In addition, gas chromatography (GC) analysis confirmed an increase in lower boiling point components after catalytic aquathermolysis, while asphaltene precipitation showed a decrease in asphaltene content.

Extraction efficiencies for SPME (especially for high boiling point components such as PAHs) improved by an average of 2.5 times when using the CWF compared to the performance of commercially available SPME fibers.

When designing a separation system for mixtures containing close boiling point components, ordinary distillation can be considered not feasible since high purity products require large number of stages and reflux ratio.

The coefficient of performance, cooling capacity, evaporation temperature, and pressures and temperatures of refrigerant at the inlet and outlet were measured and parameter analyses were conducted with different charging concentrations, different temperatures of cooling water and different matches of cycle flux between high and low boiling point components under the same evaporating pressure.

The auto-cascade refrigeration (ACR) system is driven by a single compressor, using zeotropic mixture as refrigerant, which achieves cascade between high and low boiling point components by an evaporative condenser for the purpose of obtaining a lower evaporation temperature comparing with single refrigerant system.

We show that each fixed point component of an isometric torus action of a 5 torus has the rational cohomology of a rank one symmetric space.

Within our retail portfolio, over 90% of rent comes from tenants with a service, non-discretionary, and/or low price point component to their business.

For these analyses, the three point component measures were dichotomized, with one missing point indicating a deficit in either orientation or recall.

In both cases, the steep decline in death rates after age 0 years counteracts the idea of smoothness that underlies the penalized composite link model; however, this feature could be captured by a single point component.

The dielectric gravure formulation had a high boiling point component (ca. 150 °C) to improve ink levelling on the substrate after printing.[ 19] After printing, the dielectric was photopatterned in ambient on top of the TCO gate electrodes.