Sentence examples for plunge depth from inspiring English sources

When the pin plunge depth is inadequate, a groove defect can occur at the advancing side.

The main process parameters are tool rotational speed, plunge depth, joining time and joining force.

Tool rotation speed and plunge depth were varied to determine the effect of individual process parameter on lap-shear separation load.

Next to the vibration, tool rotary speed, dwell time and plunge depth are also the important factors which affects mechanical properties significantly.

However, when tools with pins are used lap shear strength decreases with increase in tool plunge depth but increases with pin diameter.

The optimum failure load of 7.72 kN was obtained when using rotating speed of 2300 rpm, plunge depth of 2.4 mm and refilling time of 3.5 s.

Higher macro-mechanical interlocking was obtained at larger plunge depths.

The considered process parameters are welding speed, tool rotation speed, shoulder diameter and plunging depth.

Our results indicate that there are multiple approaches to achieve plans with smooth compensators similar to the plunged-depth plans.

The manually edited smooth compensator plan yielded the best dosimetric metric, +3.0, and performance, + 3.0% compared to the plunged-depth plan.

The average absolute difference for dosimetric metrics from the plunged-depth plan ranged from −4.7 to +3.0 and the average absolute performance results ranged from −6.6% to +3%.