Figure 5 shows the plots of the hysteresis loops for Ni0.4Cu0.4Zn0.2Cr x Fe2−xO4 specimens.
The critical initiation displacements in terms of the onset of crack initiation, determined from the plots of hysteresis energy versus displacement, hysteresis ratio versus displacement, and crack growth length versus displacement, are fairly close in value.
Load deflection hysteresis plot of the joint under fatigue conditions is continuously measured and used as the bearing damage index of the joint.
The system's parameters are the following: g=150, Δ=900 K, J c =85 K. From this plot, we can analyze the changes of the hysteresis between cooling and heating processes with decreasing of the parameter η which reflect the ratio of surface interaction and core interaction.
Magnetic hysteresis loops (plot of the magnetization of the sample as a function of the magnetic field strength) were evaluated at 37 °C.
In the correlation plot of the measured and simulated wavefronts there was hysteresis: the plot was elliptical not linear; see Fig. 6.
Figure 5 plots the hysteresis loops of the 2# and 3# samples measured under an applied magnetic field parallel to or perpendicular to the films.
Plot of hysteresis ratios (Mrs/Ms and Bcr/Bc) (Day plot; Day et al., 1977) representing the dominant domain states of magnetic minerals within the samples.
c W29 [O-2a] siltstone Fig. 7 Log log plot of hysteresis data for fine felsic tuffs (red diamonds), siltstones having normal ChRM directions (green solid circles), and siltstones having reverse ChRM directions (green open circles).
