Sentence examples for plate failure from inspiring English sources

The plate failure mode was observed on the inverted cone.

Various limit state equations are derived from non-linear laminate theory with different anisotropic plate failure criteria.

The results show that the non-prestressed specimens fail by spalling of the CFRP plate from the RC beam, while prestressed specimens fail due to CFRP plate failure.

There is little understanding of cervical plate misalignment as a risk factor for plate failure at the plate-screw-bone interface.

Design criteria are established to ensure that the resulting stiffeners do not yield before plate failure, and that the plating is effectively divided into panels.

For the upright cone, when the cone diameter was increased, the ice failure mode was transformed from the wedge failure mode into the plate failure mode and the ice load on unit area was decreased.

At 550 °C, the fin plate connection failure happened at a failure load that was less than 75 kN in Yu's test (Yu et al. 2009).

For 1.2 mm thick channel section, it is observed that all failures are due to rupture with three bolts connection, and also for 1.5 mm thick channel section up to 3 mm thick packing plate, the failure is due to rupture and for 4 mm thick packing plate the failure is due to vertical shear failure along the line of vertical connection.

Both midspan and plate end failure modes are studied.

Effect of geometrical parameters of the sandwich plate on failure load and mode is also investigated.

The tests were performed by applying a shear force on the anchor plate until failure, occurring in the anchor rods or the reinforced concrete block.