Sentence examples for plasma shot from inspiring English sources

The TS data analysis is performed in real time during plasma shot and the result is displayed in a strip graphic tool.

The data acquisition module receives a message containing the plasma shot information from the data acquisition console (according to the rules of the EAST data acquisition system) and then acquires the POINT diagnostic data after signal conditioning.

Prior to plasma shot and operation the vessel assembly is baked to 250/150 °C from room temperature and discharge cleaned to remove impurities/trapped gases from wall surfaces.

Fast Plasma Position Control Coils FPPCCC) PSs control the vertical position of the plasma during a plasma shot, to prevent Vertical Displacement Event (VDE), using FPPC coils installed in vacuum vessel for JT-60SA.

Ten years after the first ion cyclotron range of frequency (ICRF) heated Tore Supra (TS) plasma shot, and as TS facility, now equipped with the new 'CIEL' high power handing in-vessel components (This SOFT), is progressing towards long pulse performances, the main results and experience gained from the ICRF system are reviewed.

"The challenge for the central solenoid is that it has to ramp up every time you do a plasma shot, which is thousands of times during the lifetime of the machine so you have to create a superconducting cable that can pulse tens of thousands of times without degrading, and that is very hard with niobium-3-tin," an engineer who worked on the magnet told me.

It seems that blister formation and cracking have occurred during plasma shots.

Any inspection device able to withstand the toroidal field between two plasma shots will enhance the inspection frequency capacity of ITER during operation phase.

It allows the storage of raw data not acquired during plasma shots, i.e. data collected continuously or between plasma discharges while testing subsystems (e.g. during neutral beam test pulses).

The net deposition rates of these samples at KSTAR were about 0.6 40 ng/h cm2 (2.7 × 10−3 0.18 nm/h (graphite)) depending on the kinds of operations such as plasma shots, glow discharge cleaning, and baking of the tokamak first wall.

Finally, we compute tritium codeposition rates in Be growth regions on the wall and divertor for D T plasma shots using surface temperature dependent D T/Be rates and with different assumed oxygen contents.