Sentence examples for plane was achieved from inspiring English sources

Alignment of 5° to 10° of valgus in the frontal plane and within 2° of neutral in the sagittal plane was achieved consistently.

Alignment for an insert within 1 mrad in a vertical plane was achieved by an ex-situ adjustment at installation work.

These results indicated that 1-nm-deep mechanical processing from the surface of one cleavage plane to that of the next periodic cleavage plane was achieved by sliding the tip several times at a slightly larger load than the critical load at which the processing was started.

Delineation of the cell boundary on each plane was achieved by applying two sequential filtering steps, a two-dimensional, nearest-neighbor deconvolution step to increase the signal-to-noise ratio of the boundary while at the same time evening out the local fluctuations in fluorescence signal, followed by a smoothening Gaussian 2-dimensional radial transformation (radius = 1 pixel).

Laser beam scanning in the x-y plane was achieved by a pair of high-speed galvanometer mirrors (Cambridge Technology).

Uniform resolution enhancement along the lateral plane was achieved by placing into the switching beam path a phase plate forming a donut-shaped intensity distribution in the focal plane.

After the experimental studies, 350 lux value targeted in the work plane is achieved with ±10 lux error.

Here, we report on the implementation of FMM in which laser intensity modulation at the focal plane is achieved using acousto-optic modulators (AOM).

The arrangement of the raptorial appendages in mantis shrimps, near parallel to the axial plane, is achieved by the presence of an additional joint, resulting in a z-shape.

When correction in the two planes is achieved, the osteotomy is stabilized using a plate with four holes (Arthex, Naples, FL, USA) with two 6.5-mm proximal cancellous screws and two 4.5-mm distal cortical screws (Fig. 12).

Subsequent transition of pyramidal I slip to pyramidal II planes is achieved either by cross-slip of screw-segments or by cooperative slip of edge-segments on two equal and alternative pyramidal I planes.