Sentence examples for pipe measure from inspiring English sources

To find the penetration point of the intake pipe, measure down 8-3/4" for 4" and 6" pipe and 10-3/4" for 10" pipe.

Measure and cut the following lengths of PVC pipe: Measure and cut the following lengths of PVC pipe: Smooth the cut edges either by sanding or with a utility blade.

The experimental results of thermal conductivity of heat pipe measured at different heat inputs are compared with the thermal conductivity obtained from the analytical expression and found to be reasonable in agreement.

Take a few PVC pipes, measure them to how long you want your rink to be, then find some connectors and put 'em together!

Here are a few abbreviations used: FIPT - Female Threads; MIP - Male Threads; SOCKET- a slip socket; SLIP - unthreaded pipe, use glue to secure in a joint; SPIGOT - male slip on a bushing, etc.; OD - outside diameter; ID - inside diameter (PVC pipe measurements is usually measured by ID, so the OD will be larger than 2").

Treatment wetlands, 'in-pipe' measures, and in-lake aluminum sulfate (alum) treatment were applied to restore water quality in the four urban lakes.

Experiments were carried out on the self-designed CASTEX machine to obtain the aluminum pipe and measure its extrusion force using the expansion combination die.

Other sensors that could be deployed include eddy current flowmeters (ECFM), which are introduced into the pipe to measure flow velocity in the pipe, ultrasonic flowmeters and permanent magnet based side wall flowmeters.

The plots (1 m wide and 2 m long) were set up to capture runoff via a slotted PVC pipe and measure it using tipping bucket apparatus: at each of the slope/aspect locations there were duplicate plots.

In order to reduce the measurement error caused by the pore volumes of the traditional method, we made a new design that the upstream and downstream reservoir volumes can be changed, In addition, we added a by-pass pipe to measure the bidirectional permeability instantaneously, which can reduce the total test time significantly.

The procedure required crews to periodically withdraw the drill pipe to measure its proximity to SS25, a process that took nearly a day before they could recommence drilling.