Sentence examples for pin test from inspiring English sources

For example, Mitrushina et al. [42] found that, whereas the left-right difference in performance did not vary with the age of the participants in a finger tapping test, the superiority of the dominant hand increased with age in the Pin test, a highly demanding task in terms of visuomotor coordination, attention, and precision of movement.

The ORNL-19 pin tests are chosen to assess the code's capability.

The examination of fuel from the pin tested at 1300 °C showed presence of large number of bubbles; both intragranular as well as intergranular bubbles.

To assess the development status of this code, benchmark calculations were performed with the ORNL 19 pin tests and EBR-II seven-assembly SLTHEN calculation results.

We lastly show FE models using the pull-out response characterised in single pin tests give excellent predictions of experimental behaviour in multi-pin joints with no additional calibration.

Second, the model was applied to the Oak Ridge 19-pin test, and it was found that the measured outlet temperature distribution could be predicted with a maximum error of 8% (<7 °C).

The IEEE 1149.1 requires that every device contain a test-access port (TAP) with four dedicated input/output (I/O) pins: test-data in (TDI), test-data out (TDO), test clock (TCK), and test-mode select (TMS).

Whereas S1, S2 and S3 are conserved in all four PINs tested, S4 and S5 are not conserved in PIN2 where the corresponding protein sequence motifs are divergent when compared to PIN1, PIN3, PIN4 and PIN7 and when compared to the strong conservation of the S1 S3 phosphosites in all PINs including PIN2.

When I was sat on an examination bed in hospital recently, repeatedly being stabbed with a sharp pin to test reflexes, I was asked if it hurt.

THC was first demonstrated to enhance opioid antinociception when both drugs were administered parenterally in a hairless guinea pig model using the pin prick test.

Finally the specific wear rates were deduced from wear volume of the pin for test duration distances of 50, 100, 150 and 200 m.