Sentence examples for pillar resulting in a from inspiring English sources

Although the barn had withstood two previous quakes in 1969 and 1989, this most recent temblor left it with a cracked foundation and support pillar, resulting in a sagging ceiling and decidedly south-leaning tilt.

This was due to the smaller gap between the pillars, resulting in a higher hydraulic resistance.

A FFT analysis of the top view of the SEM images of the bSi surfaces confirmed the isotropy of the nanopillar pattern, showing a variation in the average distance between the pillars resulting in a broad halo ring in the FFT images (Fig. 2b and Fig. S1B).

Here, a distressed zone occurs in the roof of the opening and the stress over the excavated area is shifted into the neighboring solid coal pillars resulting in an increase in overall stress over the solid coal pillars.

A thin metal rod was dipped into the liquid PDMS and gently brought into contact with the pillars, resulting in deposition of a small droplet of liquid PDMS on the tip of each pillar.

The experimental results show that the surface coating increases the density of shear bands in the Vit.1 pillars, resulting in the improvement of the compression ductility.

The study clearly shows high confining stress build-up in coal pillars resulting in up to twice higher peak vertical stress and high strain energy accumulations in some western US mines in comparison with peak stresses predicted using common empirical pillar design methods.

Application of an axial stress to the free end of the pillar results in a singularity in stress at the corner with the substrate.

For low preload, only the long pillars form contact, resulting in a low pull-off force.

This causes an asymmetric, hyperextension compression injury of the posterior column, resulting in asymmetric or unilateral fractures of articular pillars or processes.

As a result more vertical growth was observed, resulting in a pillar-like structure with a featured diameter of 35 40 nm and a spatial distance of about 65 70 nm (Fig. 9). Figure 10a shows the 3D-RGD nano-pillar array, where 10 12 pillar heads coalesced to form an integrin receptor site at a distance of around 125-150 nm.