Sentence examples for phases up from inspiring English sources

When focusing on chargeability m, the pyrrhotite-bearing sediment with high phases up to approximately 400 mrad (70 mbsf, site C9017) exhibits a high chargeability of approximately 0.8.

The record section obtained at OBS106 on Line SPr10 (Fig. 5(a)) is characterized by many small undulations in the first and later arrivals, a very small amplitude of P n arrivals, and a large amplitude of the later phases up to offset of approximately 60 km.

In the Fe FeS system, Fe3S2, Fe2S, and Fe3S have been reported as intermediate phases (e.g., Fei et al. 1997, 2000; Li et al. 2001), and hcp-Fe and Fe3S are stable as the subsolidus phases up to the core conditions.

Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions.

In an electrostatic example for a multiphase granular material with about two thousand corners and triple junctions and a conductivity ratio between phases up to a million we compute a common functional of the solution with an estimated relative error of 10−12.

In respect to X-ray diffraction measurements [7], the ceramics prepared at lower T s = 1100 1200 °C are composed of the main spinel phase and a large amount of additional MgO and Al2O3 phases (up to 12%%), while the ceramics sintered at high T s of 1300 and 1400 °C contain additionally only the MgO phase in the amount of 3.5 and 1.5 %, respectively.

However, Dgcr8-knockout ESCs significantly accumulate in G1 phase (up to 60% under contact-inhibition conditions).

Fe3S is the only stable phase up to 250 GPa (Ozawa et al. GRL 2013).

Working standard with 10 mL of dimethyl acetamide and dilution with the mobile phase up to 100 mL.

However, the metabolic effect in earthworms increases the crystalline phase up to 28.47% (500°C) and 16.69%(700°C).

Then the mirror has to be phased up, and the instruments cooled and all their modes tested.