Your English writing platform
Discover LudwigSuggestions(1)
Exact(13)
Hence, phase inversion point of a certain oil/water system should be avoided.
However, further increase in surfactant concentration to 5 wt% did not affect the phase inversion point.
In addition, the drop size near the phase inversion point did not obviously change with particle concentration.
However, due to the large pressure gradient which might occur at the phase inversion, it is important to operate well below the phase inversion point.
Therefore, transportation of oil and water in pipes should be far from the phase inversion point (Ashrafizadeh and Kamran 2010; Hasan et al. 2010; Abdurahman et al. 2012).
The viscosity of the oil-in-water emulsions is generally very low below the phase inversion point (i.e. the change of the continuous phase from water to oil).
Similar(47)
The phase inversion points and the in-situ droplet size distributions were also measured and a SARA analysis was made on all crudes.
The lower bound passes through a minimum at a composition of about 5050 (by volume), which corresponds to the phase-inversion point in the Hill model.
In this work, the point of phase inversion for several polymer blends is investigated experimentally.
The experimental results were compared to the values of the point of phase inversion calculated with the semi-empirical model.
Co-continuity at such flow conditions is limited to the point of phase inversion, contrary to the range of co-continuity usually found after extrusion.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com