Sentence examples for perpendicular rods from inspiring English sources

Fröhlich [28] presented the cubic mouse, a box with three perpendicular rods passing through its center.

The interaction of two hysteresis rods in a variety of relative geometries are tested; perpendicular rods are found to have no significant interaction while parallel rods could have their dampening ability reduced by half, depending on the rod separation distance.

The sticks are connected to a motorized pedestal that spins the two perpendicular rods in circles.

In the polyaxial screws group, the technique of screw-rod mounting was performed with a screw holder perpendicular to the rod, while securing the screw head tightly.

Carbon nanotube moment of inertia was taken as ( I=frac{ml^2}{12} )—the moment of inertia of straight thin rod with the length of l and mass of m, the rotation axis is perpendicular to the rod and passes through its center of mass.

When the tilted Ag NRA is illuminated by electromagnetic waves, anisotropic absorption is observed because the oscillation of the electric field along and perpendicular to the rod induces the longitudinal plasmon mode (LPM) and the transverse plasmon mode (TPM [10].

This paper presents a method for multi-component three dimensional nanostructuring during physical vapor deposition, termed simultaneous opposite glancing angle deposition (SO-GLAD), which exploits atomic shadowing effects to control both the shape and the composition of nanorods parallel (in-plane) and perpendicular to the rod-axis.

Transmission electron microscopic observation in bright and dark-field imaging modes and selected-area electron diffraction analysis successfully evidenced that POM chain stems in the rodlike crystals are set parallel to the substrate surface and also perpendicular to the rod axis.

Taking into account the influence of relaxation processes, the results indicate that a reduction of timber moisture content of 3% around threaded rods, positioned perpendicular to the grain, can already lead to critical stresses with respect to moisture induced cracks.

The cuts are then made perpendicular to the intramedullary rod.

It is important to keep the tungsten rod exactly perpendicular to the solution surface and in the the center of the larger SS tube.