Sentence examples for peroxide consumption from inspiring English sources

In this process, hydrogen peroxide consumption could be considered as one of the factors that considerably affects costs.

Application of this pre-treatment led to considerable increase of degradation rates and decrease of hydrogen peroxide consumption.

The reaction presented a high velocity during the 1st hours and afterwards it could not continue evolving due to the almost total peroxide consumption.

First-order rate constants, initial rate, time necessary for mineralising 90% of the initial TOC and hydrogen peroxide consumption were calculated in all cases, enabling comparison both of treatments and of the selected pesticide reactivity.

The obtained experimental results show that the proposed MFLC-MSA strategy can achieve good performance to guarantee on-specification discharge at maximum degradation rate using readily available measurements such as pH and ORP, inferential measurements of oxidation kinetics and peroxide consumption, respectively.

The multivariate experimental design allowed the development of empiric non-linear quadratic models for total organic carbon (TOC) removal after 120 and 240 min of the reaction, and the time needed for total hydrogen peroxide consumption, which were adequate to predict responses in all of the range of experimental conditions used.

Open image in new window Fig. 9 Hydrogen peroxide (H2O2) consumption for desulfurization of heavy oil containing 5% sulfur as a function of the selectivity of H2O2 for sulfur oxidation to sulfones.

In both these systems, significant amount of reductant consumption and peroxide production is seen with CPR alone, which is comparable with the amounts present when CYP and its substrate are introduced.

Hydrogen Peroxide is not for consumption.

Concentration of glucose is quantified by measuring oxygen (O2) consumption or hydrogen peroxide (H2O2) production via electrochemical oxidation or reduction occurring on the surface of the working electrode.

After a 10 min preincubation period reactions were started by addition of 70 µM hydrogen peroxide (H2O2, Sigma) and NADPH consumption was followed at 340 nm.