"permissible values" is a correct and usable phrase in written English.
It is commonly used in fields such as mathematics, statistics, and computer programming to refer to the values that are allowed or acceptable within a specific context or system. Here is an example sentence: "In this equation, x represents the variable, and y represents the output value. The permissible values for x are all real numbers between 0 and 10, inclusive."
Permissible values of k range from 1 to 15.
These stresses can exceed permissible values in the case of incidental strong thermal differences.
Comparison of the results at permissible values of f indicates that a simple weighting-factor method gives good results.
The deflection and crackwidth of coconut shell concrete is comparable with the permissible values given by IS 456:2000, ACI-318 and EC 2 1992.
The electron behaves like a spinning top, with its own intrinsic angular momentum of magnitude s = Square root of√(1/2)(1/2 + 1), with permissible values along the quantization axis of msh = ±(1/2)ℏ.
The electron behaves like a spinning top, with its own intrinsic angular momentum of magnitude s = √((1/2)(1/2 + 1)), with permissible values along the quantization axis of msh = ±(1/2)ℏ.
Regarding the roughness, the maximum permissible value of 50 nm for an articulating surface is reached before 1 h exposure, irrespective of the oxidation process.
The technical standards for interoperability (TSI) analysis showed that the slipstream velocities generated were below half of the maximum permissible value of the standard whereas the pressure was 43% greater than the limiting value.
The simulation model was used for investigating the effect of changing fin spacing on chiller performance where changing fin spacing from its design value to minimum permissible value increased chiller cooling capacity by 3.0% but decreased the COP by 2.3%.
The horizontal electrode cell could reduce oil concentration in wastewater from 500 to 6 ppm within 30 min (i.e. below the maximum permissible value which is 10 ppm) with a separation efficiency of 99.8%.
The study suggests that face convergence slope of 75 mm/m of face advance may be considered as the maximum permissible value for selection of optimal capacity support for safe working in a given strata condition.
