Sentence examples for performing displacement from inspiring English sources

This is done by performing displacement experiments using two miscible fluids of different electrical resistivity and monitoring the time variation of the overall fracture resistance.

This research resulted in the development of a new method for performing displacement control analysis of distributed loads to obtain the ultimate shear strength of structural components.

Finite size effects could not eventually explain why clustered deer present an abrupt decline in the probability of performing displacements for distance larger than about 200 m since this distance is well inside the range of animal detectability from the high seats, and small if compared to a typical home range, which in our study area are larger than 2 km2 [23].

When we perform displacement off-set to 25 nm, then the loading part exactly fits to Hertzian contact equation.

The external field is also used to perform displacement and deformation of the nanoparticles arrays, as well as their dynamical assembling and disassembling.

As also stated in Table 1, we have also performed displacement experiments with incubation of the 125I-[Tyr3]-neurotensin 125I-[Tyr3]-neurotensin 125I-[Tyr3]-neurotensincold type 1 NT-radioligand analog SR48692.

A double edge notch tension compression, DEN(T C), specimen to perform displacement controlled creep-fatigue crack growth testing is developed and optimized with the help of finite element and boundary element analyses.

Four specimens, including ITO, polyethersulfone (PES), polyimide (PI), and zinc oxide (ZnO), were prepared as listed in Table 1, and nano-indentation tests for each material were performed under displacement control with maximum displacements from 50 to 500 nm using an MTS nanoindenter XP system with a Berkovich diamond indenter (Eden Prairie, MN, USA).

The aforementioned studies placed the imaging probe parallel to the RF electrode when performing electrode-displacement strain imaging for monitoring RFA to measure the maximum strain of the tissue for imaging (the angle between the imaging transducer and the RF electrode should be as small as possible).

Tests must be performed by displacement control of the machine and the crack opening displacement in the notch lips at the level of the alignment of the pulling bars (COD) should be controlled and recorded.

The analysis in the lateral direction was performed using displacement control (rather than load control) so that the lateral loads developed at various lateral displacement levels could be evaluated as a percentage of the pile diameter.