Sentence examples for performance under impact loading from inspiring English sources
However, the planar nature of an FRP's microstructure results in relatively poor performance under impact loading.
Different geometries of curved sandwich plates are analysed to study their performance under impact loading.
It was also observed that UHPC mixtures incorporating long steel fibers exhibited enhanced performance under impact loading compared to that incorporating short fibers (Yu et al. 2014).
The importance of the ductility of connections has been highlighted for the robustness evaluation of structures in FEMA's report "Connection performance under impact loads… needs to be analytically understood and quantified for improved design capabilities and performance as critical components in structural frames".
Computer methods based on finite element analysis are able to predict the performance of plastics under impact loading.
It is shown that using 0.5% polypropylene fiber in the silica fume mixture increases compressive split tensile, and flexural strength, and especially the performance of concrete under impact loading.
A conventional monolithic reinforced concrete (RC) column was also casted and tested as a reference column to compare the performance with segmental columns under impact loading.
To investigate the effect of the reinforcement ratio on the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) beams under impact loading, a total of four large-sized (200 × 270 × 2900 mm) beams were fabricated and tested using a drop-weight impact test machine.
In addition, based on the present model, the performance of sandwich beams with self-similar hierarchical hexagonal honeycomb cores under impact loading is studied.
In this study, the mechanical performance of reinforced concrete (RC) beams covered with the HSSWM-HPM under impact loading were evaluated using both laboratory experiments, and numerical simulations.
However, early occurrence of pull-out and the likely presence of porosity were found to affect the performance of the laminates, especially in terms of the appearance of early damage under impact loading.
