Sentence examples for performance of solution from inspiring English sources

However, although foamy oil can improve the performance of solution gas drive in heavy oil, only approximately 5 15% OOIP can be recovered during primary production.

For this NP-hard optimisation problem we propose a new mixed-integer linear programming model, as well as several classes of additional constraints meant at improving the performance of solution algorithms and the quality of the lower bounds produced.

After thermal annealing (150 °C, 10 min), the PCE of this molecule based device increased to 3.07%, with Jsc of 7.10 mA/cm2, Voc of 0.78 V and FF of 55.4%, which indicates that high performance of solution processed small molecule based solar cells can be achieved using thermal annealing by carefully design molecule structure.

Single-bond compounds, TPADOBT and CZDOBT, were designed as references to fully investigate their photovoltaic (PV) performance of solution-processed devices.

The effect of grain boundary misorientation on the high-cycle fatigue performance of solution-treated, metastable-β titanium alloys was investigated.

The results obtained from the newly proposed method are compared with numerical simulation results, and comparison results illustrate that the performance of solution-gas-drive reservoirs can be obtained fast and accurately through the new method.

As a result of the spin-coated OLEDs employing MPPA-MCBP as the host-free near-infrared emitter exhibits a highest external quantum efficiency (EQE) of 0.62% and a peak wavelength at 698 nm, which indicates the design of self-host TADF dendrimers containing bipolar dendrons will be a promising strategy to improve the electroluminescent performance of solution-processed nondoped device.

Additional constraints rewarding bioclimatic representation under two conflicting climate scenarios resulted in only a small decrease in the performance of solutions with respect to current climate.

Results of the cases with different calculation parameters are presented, through analyzing which the influences of the parameters on the performance of solutions by the bionic optimization are investigated.

Figure 7 shows the relative performance of solutions in these four settings for the first scenario.

The large efforts focused on manufacturing had blinded the enactors for the issues and difficulties in optimizing performances of solution processable polymers.