Sentence examples for performance and the maximum from inspiring English sources

Bit error rate (BER) performance and the maximum achievable data rate of the new modulation scheme are theoretically analyzed.

However, the time to reach maximum performance and the maximum value obtained were dependent on the pretreatment conditions.

Nevertheless, the presence of black slag improved long-term biofilter performance, and the maximum elimination capacity (43 g m−3 h−1) was recorded in the biofilter packed with a mixed support.

The results showed that integrating MoS2 with ZnIn2S4 could remarkably boost the photocatalytic H2 evolution performance and the maximum H2 evolution rate of 201 μmol h−1 was achieved over 1 wt% MoS2 loading on the ZnIn2S4, corresponding to the apparent quantum efficiency (AQE) about 3.08% at 420 nm monochromatic light.

The contribution of the fibres was clearly highlighted through this experimental study, a strong relationship between the bond performance and both the maximum tensile strength and strain ductility of UHPFRC was noted.

The optimal pairing demonstrates the best fairness performance and achieves the maximum Jain's fairness index, which is around 0.98.

The simplest coordinate-stencil subclass, which is the d2Q5 TRT bounce-back scheme, demonstrates the best performance and achieves the maximum accuracy for most stable relaxation parameters.

For a given magnetic performance and volume, the maximum temperature inside the electromagnet is minimized by selecting the shape of the coil (length and outer radius), the number of cooling discs, and the amount of high thermal conductivity material.

The analysis results show that the maximum coefficient of performance (COP) and the maximum cooling capacity of the TEC system can be obtained when the finite total thermal conductance is optimally allocated.

The results of the energy and exergy analysis indicate that Case 6 gives the highest coefficient of performance (COP) and the maximum exergy efficiency compared to the baseline case, which are 15.51% and 18.76% respectively.

It is found that the configurations of the supporting plate affect the performance of the cell, and the maximum performance can be achieved by optimizing its open ratio by varying the rib configuration and rib thickness.