Sentence examples for percentage of strength from inspiring English sources

"In your formula, you need to choose numbers at some stage or to choose what is the percentage of strength you give to, let's say, a ply of carbon.

In addition, a significant variation in the effect of nano silica on the percentage of strength improvement of high volume fly ash cement composites has been observed (Zhang and Islam 2012; Hou et al. 2012; Shaikh et al. 2014).

The percentage of strength reduction was calculated using normal values according to age and gender as follows: % strength reduction = (theoretical value - measured value)/ theoretical value [ 24].

Overall, the subjects lost an average of 28.9% strength after exercise, and there was no significant difference (P > 0.05) between groups in the percentage of strength loss.

Power analysis was not performed for detecting changes in disease progression, as the percentage of strength decline was not known at the time the protocol began.

As stated in our manuscript, when referring to the number of patients needed, 'power analysis was not performed for detecting changes in disease progression as the percentage of strength decline was not known at the time the protocol began'.

The percentages of strength increase between 28 and 56 days in the mortars containing 50% FNS were 8, 20 and 8% for the binder series of 100% OPC, 30% fly ash and 30% GGBFS, respectively.

Finally, the average indirect tensile strength for all mixes as a percentage of compressive strength was ∼14%.

It was also found that the original strength of the concrete has little influence on the percentage of residual strength at high temperatures.

In essence, the DS t) is determined from the design strengths associated with two pavement designs corresponding to two different design periods, namely, t and T. In this sense, the DS t) represents the percentage of additional strength required for a pavement design with (T) years compared to the strength needed for a pavement design with (t) years.

The red bars were presented with full saturation and luminance of 27 cdm−2 while the luminance values of the green bars were varied to determine the percentage of full strength green (measured as 77 cdm−2) that is perceived as equal to full strength red.