Sentence examples for percentage deviations between from inspiring English sources

Furthermore, the percentage deviations between the B2bot_Pro and the B0_ABT (PD_B2B0are) are mostly lower than 30% for all seasons of the studied years, opposite to the other percentage deviations studied in this work.

The percentage deviations between the calculated (with and without Sself) and the measured full-energy peak efficiency values are calculated by Δ 1 % = ϵ cal ‒ with S self ‒ ϵ meas ϵ cal ‒ with S self × 100 Open image in new window (44) Δ 2 % = ϵ cal ‒ without S self ‒ ϵ meas ϵ cal ‒ without S self × 100, Open image in new window (45).

It was found that this equation overpredicts the density of the nanofluids studied in this work with deviations that it can reach 0.5% for A-TiO2/EG and 0.3% for R-TiO2/EG at the highest concentrations and temperatures, as shown in Figure 4. Figure 4 Percentage deviations between experimental and predicted densities.

Percentage deviations between average flux values (v av ) and flux values (v epa ) derived by extreme pathway analysis were calculated in Table 4.

This data was correlated with an average absolute percentage deviation between measurements and the correlation of 0.19% and a maximum deviation of 0.60%.

Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.

The results obtained show that the percentage deviation between the experimental and IRI predicted foF2 values during these storm periods is as high as 100% during the main and recovery phases.

In general, RPE shows the percentage deviation between the calculated values from the Weibull distribution and the calculated values from measured data.

The observed NmF2 and IRI-2007 model predictions (left panels) and the percentage deviation between data and models (right panels) at Chiang Mai station for different seasons.

The mean percentage deviation between the field temperature data and the temperature data from regression relations is estimated by Eq. 3.

Similarly, the MPE shows average of percentage deviation between the calculated values from the Weibull distribution and the calculated values from measured data, and MAPE shows the absolute average of percentage deviation between the calculated values from the Weibull distribution and the calculated values from measured data.