Sentence examples for per unit strength from inspiring English sources

The analysis is presented in terms of embodied carbon per unit strength; this shows that there is an optimum strength for all concretes (with regard to minimising eCO2 per unit of structural performance) of between 50 and 70 MPa.

The findings of this research show that these three factors can outweigh benefits associated with use of SCMs: depending on SCM type and use of allocation or changes in transportation, high levels of SCM replacement do not consistently result in lower GHG emissions for the production of concrete per unit strength.

Overall, the buildup rates were shifted to larger values in the high speed regime, but the change in buildup rate per unit motion strength was similar in the two regimes.

Production cost (per unit input).

This standard allows to obtain the peel strength per unit width, which is medium strength per unit width, applied by an angle between 90° and 180°, depending on the flexibility of the substrate, in relation to joint, needed to lead to rupture.

In particular, consumers can work out value for money based on price per unit of colouring strength rather than price per gram, given the wide possible range of colouring strengths that different kinds of saffron can have.

8 For eight example purchases, table 1 shows that a ban on below cost selling thresholds would differ considerably compared with, for example, a 45p minimum unit price level, and that since the duty on cider is low and does not increase in line with alcohol content, the ban on below cost selling threshold falls as low as 6p per unit for high strength cider.

The aim of this study was to (a) examine the association between upper leg lean tissue mass, knee extensor strength, muscle quality (strength per unit lean tissue mass) and functional performance and (b) to determine the utility of tertiles of muscle strength and muscle quality to distinguish gradations of functional capacity in healthy 50 70 y women.

The overall mechanical behavior of composites in terms of specific strength (defined as strength per unit weight) was depicted in Fig. 3.

Table 8 Adhesive joint leather/PU: peel strength per unit width Surface treatments Maximum load (N) Peel strength per unit width (N/mm) All treatments 215 7.17 Untreated 29 0.97 PU: mechanical treatment 188 6.27 PU: primer 71 2.371

Table 7 Adhesive joint leather/TR: peel strength per unit width Surface treatments Maximum load (N) Peel strength per unit width (N/mm) All treatments 264 8.80 Untreated 17.3 0.58 TR: chemical treatment 17.5 0.58 Leather: mechanical treatment 73 2.43 TR: chemical/Leather: mechan.