Sentence examples for per grit size from inspiring English sources

The strips used were attached to a micromotor (Eva Intra Lux Prophy head 61 LRG KaVo, Biberach, Germany, 7,500 rpm) operated for 20 s per grit size.

a Group I, abrasive grit size effect.

The Diamond Grit Selection focuses on diamond type, grit size, and concentration.

Compared with using 60# grit size abrasive, it was clear that deep grooves, large smearing areas, and adhesive chips were reduced by using a 180# grit size abrasive.

The abrasive grit size has a major influence on the surface roughness and the surface finish, the improvement by using a smaller grit size abrasive is significant.

The coarser grit size abrasives have bigger abrasive particles, causing larger areas of rubbing during grinding; meanwhile, the size and distribution of the abrasive grit grains are more uneven in coarser grit size abrasives; thus, more defects and a worse surface finish have been induced by using coarser grit size abrasives.

Surface defects were reduced even more by using the finest (400#) grit size.

Using smaller grit size abrasives or grinding lubrication results in fewer surface defects.

For the investigation of the influence of the abrasive grit size, 60# (165~405 μm), 180# (25~114 μm), and 400# (11~45 μm) grits were used as the final surface finish, respectively.

The results showed that the combination of grit size with distance and pressure during the grit blasting were the most influential parameters.

As abrasive grit size gradually reduced to 320 grit, the roughness on the stone surfaces decreased greatly while gloss readings did not change significantly.